Glass fiber cloth is a fabric woven with glass fiber (see inorganic fiber). It has the properties of insulation, heat insulation, corrosion resistance, non-combustibility, high temperature resistance, high strength, etc. It is mainly used as insulation material, glass fiber reinforced plastic reinforcement material, chemical filter cloth, high pressure steam insulation glass cloth material, fireproof products, high elastic transmission belt, construction Materials and wall covering etc. The glass is brittle, and the thicker glass fiber is easy to break when weaving, so the fiber diameter generally used to weave glass cloth is 3.8 to 15.5 microns. Glass fiber can be made into filament and spun yarn. The filament is melted and spun from the raw materials used at high temperature, which is similar to the spinning of ordinary synthetic fiber filament; the short fiber is made by flowing the melt through the nozzle hole, and then blowing through compressed air or high-pressure steam. Bundles, twists, and strands into glass spun yarn. The weaving method of glass cloth is the same as general cotton fabric. Coated fabrics are usually made of resin, etc., and printed glass cloth can also be made of paint.
Pipeline anti-corrosion insulation cloth (pipe wrapping cloth) Product introduction: Use: Mainly used for pipeline anti-corrosion and insulation. usage:
① Anti-corrosion: Derust the pipeline first, and coat the outer layer of the pipeline with a suitable density fiber cloth and asphalt coating or other products at the same time. Generally two or three floors.
②Insulation: Wrap the anti-corrosion-treated pipes with insulation quilt or insulation pipe, then use fiber cloth of suitable width and density to wrap the outside of the insulation layer and then paint or directly wrap the asphalt cloth. Features: Anti-corrosion, will not rot when buried in the ground, will not be weathered in the air, not afraid of water, not afraid of sun. Due to the different needs of construction units, our factory has developed rubber-edged fiber cloth for external insulation materials. This product can provide products of any width and density according to the requirements of construction. If you need other specifications, please order.
Glass cloth product introduction: Industrial glass fiber products. Uses: Mainly used for pipeline anticorrosion, heat preservation, flue {exhaust duct}, European style, lightweight wallboard, sandstone murals, glass fiber reinforced plastic products and a series of cement gypsum and other GRC components and insulation Composite panels, movable panels and walls, etc. usage:
① Anti-corrosion: Derust the pipeline first, and coat the outer layer of the pipeline with a suitable density fiber cloth and asphalt coating or other products at the same time. Generally two or three floors.
②Insulation: Wrap the anti-corrosion-treated pipeline with insulation quilt or insulation pipe, then wrap it with fiber cloth of suitable width and density on the outside of the insulation layer and then paint or directly wrap it with asphalt cloth. Performance: anti-corrosion, will not rot when buried in the ground, will not be weathered in the air, not afraid of water, not afraid of sun
