info@eternitymaterials.com    +8615257370658
Cont

Have any Questions?

+8615257370658

Feb 16, 2020

What are the reasons for the shrinkage and deformation of glass fiber cloth composite materials

Glass fiber is a very important material in my country, and it is used in many industries in China, and its various derivatives such as glass fiber cloth, glass fiber mat, chopped glass fiber yarn, glass fiber composite materials, etc. Very important uses, of which glass fiber composite materials are a very large category, and there has always been a problem that plagues people in the processing of this industry, that is, the problem of shrinkage and deformation. What makes this happen? There are two mechanisms that cause shrinkage: curing shrinkage and cooling shrinkage.

Curing shrinkage usually occurs in two stages: curing (before and after demolding) and post-curing (after demolding).

1. Curing shrinkage refers to the volume change of the resin during the curing process. This kind of solidification shrinkage is inevitable, try to be before peeling from the original mold.

2. After the mold is taken out, some solidification will occur, and these additional shrinkage will cause defects on the mold surface. This is often referred to as "post-curing", but the true deformation is due to additional shrinkage during the post-curing process.

It can be seen that choosing a suitable low-shrinkage resin is an effective way to solve the above problems.


Send Inquiry