The surface temperature change of the external insulation is greater than that of the external wall without the insulation layer. In summer, the solar heat per square meter has a far greater impact on the surface temperature of the external insulation than the temperature change of the external wall without insulation. The heat is blocked on the surface by the outer insulation layer, so the temperature rise rate of the outer surface and the sudden temperature drop during rain are much faster than the temperature rise and fall of the outer wall without insulation.
The method of external thermal insulation makes the deformation stress on the surface of external thermal insulation occur very frequently and quickly.
The external insulation material system should be completely flexible. The deformable amount of the outermost material should be greater than that of the inner layer. If the outermost layer has a higher flexibility index than the adjacent inner layer, the temperature deformation rate should also be coordinated with each other.
Inducing deformation and changing the direction of deformation:
The thermal stress generated on the surface of the external insulation should be completely released in time. Do not let its external insulation system constitute damage. It should be combined with soft reinforcement and fiber-mixed flexible mortar to release various deformation stresses in time, and adopt a technical route that allows deformation, restricts deformation, induces deformation, and changes the direction of stress transmission.







